• On MP3.com: Free music videos
September 5, 2008 10:29 AM PDT

Counting blurry lines: Should CNET test for motion resolution on HDTVs?

Posted by David Katzmaier
  • Print

This monoscope pattern can help measure motion resolution, but the results can be a bit too blurry to pin down.

(Credit: CNET)

In the course of testing for HDTV reviews here at CNET, I always compare displays directly against one another side-by-side using both normal program material--typically Blu-ray movies, HDTV, and standard-definition material--and test patterns from special discs. I'm always on the lookout for new test patterns, so earlier this summer when I spoke with another TV reviewer, Gary Merson of hdguru.com, about his tests for motion resolution, he was kind enough to pass along a Blu-ray Disc called "FPD Benchmark Software for Professional." It contains a variety of test patterns, most of which I've seen and used before, with one notable exception. A suite of patterns and program material is devoted to testing and demonstrating motion resolution, and I'm considering incorporating it into CNET's regular HDTV tests.

Evaluating an HDTV's resolution with still patterns is easy on fixed-pixel displays like flat-panel plasmas and LCDs and rear-projection microdislays. Just put up a resolution pattern, which consists of alternating black and white lines that correspond to the display's native resolution, which is 1920x1080-pixels for a 1080p HDTV. If every line is clearly resolved, the display passes the full resolution of the pattern. With motion, however, the evaluation gets a lot more tricky and subjective.

The main pattern used to test motion resolution from the FPD Benchmark disc is called the monoscope, which scrolls across the screen at a set, medium-speed rate. A series of vertical wedges consisting of four parallel lines, each with numbers corresponding to a vertical resolution between 100 and 1,200, is set in the middle of the pattern. While the pattern scrolls across the screen the lines blend together and blur, to a lesser or greater extent depending on the display in question. To arrive at a number that corresponds to the display's vertical resolution, the viewer (er, reviewer) must judge when the lines become blurry and blend into one another. The number closest to the place on the wedge just before the blending occurs is the motion resolution.

Unfortunately, that judgment can vary. I rounded up a couple of CNET staffers, Matthew Moskovciak (a reviewer highly familiar with test patterns) and Matthew Panton (our summer Intern), explained the criteria for the test, and asked them to write down the results they got from looking at seven HDTVs' motion resolution, without telling me or one another. The calibrated TVs were placed side-by-side and set in the picture modes that gave the best motion resolution results. The table below summarizes our findings:

 

Moskovciak

Katzmaier

Panton

Pioneer PDP-5020HD

900

1,080

1,200

Samsung LN46A550

500

300

300

Sony KDL-46Z4100

600

500

500

Vizio SV470XVT

700

700

800

Sony KDL-46W4100

600

500

600

Samsung LN52A650

500

500

500

Panasonic TH-50PZ800U

600

600

500

As you can see, we agreed completely on only two of the televisions, and while we were within 100 lines of one another in most other cases, that variance is still significant. Aside from the variance, I have a few other reservations about including motion resolution among the regular tests I perform for HDTV reviews.

First off and most-important, to my eye and those of Matthews at least, differences in motion resolution are very difficult to discern with actual program material. For one example, we watched a high-definition football game with the best display in the test (the Pioneer PDP-5020FD plasma) placed right next to the worst (the Samsung LN46A550--the only LCD in the test without a 120Hz mode) and we found it hard to detect more blurring in the Samsung LCD, even when paying close attention to potentially blurrier areas, such as the hash marks when the camera follows a kickoff downfield or the churning legs beneath the return man. For two displays with such disparate results according to the test pattern, I think most people would expect to see more of a difference. "Difference" is the key word here; we did perceive a good deal of blurring in many fast moving shots on both displays, but either that blur was inherent in the source (usually a consequence of quick camera movement) or was a consequence of the brain's inability to process fast-moving details. In any case, most of the blur we saw couldn't be faulted on the displays. This issue raises one of the most-important and tricky question TV reviewer's face: If a difference revealed by a test pattern doesn't translate to any significant difference that experienced reviewers can detect with real program material, how worthwhile is it?

Second, to get the full blur-busting capability out of the 120Hz LCDs, namely the two Sonys, the Vizio, and the Samsung A650, I had to engage their "smooth" antijudder processing. With smooth modes disabled on these sets, they scored as low as the 60Hz Samsung A550. The problem is that smooth processing, to my eye at least, is inappropriate for film-based sources like DVD and Blu-ray movies; it makes them look way too much like video. Ideally, one could disable the smooth modes and still get the benefit of the higher motion resolution (engaging Smooth gained 100-200 lines of motion resolution).

Third, the test disc itself was produced by a Japanese consortium of plasma manufacturers, so it can hardly be called impartial. I try to use test material that's technology-agnostic in my reviews, although in this case (and that of the HQV Benchmark discs I use to test video processing) I think the test material can reveal important differences in displays, regardless of who produced it or what agenda they may have.

Compared with other the Geek Box tests, which are (by design) objective, any inclusion of motion resolution testing would have to be taken with a grain or ten of salt. But I hear lots of readers complaining about motion blur on their LCDs, or citing blurring as one reason why they chose plasma over LCD, which leads me to believe some sort of motion resolution test, no matter how flawed it may be, would be welcome. What do you think? Would you like to see motion resolution tests included in the Geek Box or at least mentioned in CNET reviews, regardless of the issues mentioned above? Let me know right here, and I'll take your comments into consideration. And if you have any other tests you'd like to suggest, feel free.

David Katzmaier reviews HDTVs for CNET. E-mail David.
Recent posts from Crave
Dead To Me, 'Little Brother': Free MP3 of the Day
Blogging from 25,000 feet
Video: 2010 Lexus RX450h
This week in Crave
Hearts Revolution, 'Switchblade': Free MP3 of the Day
Add a Comment (Log in or register) 11 comments
by navsimpson September 5, 2008 11:30 AM PDT
I'll be honest - that was a bit over my head. But I know that how a TV handles videogames (and, thus, motion) is increasingly important for many HDTV buyers. Perhaps if you tested gaming as a regular part of the Performance section, then, despite the fact that it'd be somewhat subjective, you'd give readers a more accurate picture (heh) of what they're buying. A simple statement of "this TV is among the best/worst for gaming" would probably be more helpful than something as difficult and impenetrable as the 'motion resolution'.
Reply to this comment
by fuzbears September 5, 2008 11:51 AM PDT
Even with your getting different readings, your relative readings were about the same and hence useful.

Not everyone uses their TV's mostly for film, and some are more sensitive to blurring than others. Ignoring it altogether would be just like saying high pitch noises don't exist or matter cause you can't hear them (yet your teenager can).
Giving a rating on it means we can go to store, and compare the sets, and see if it matters to us individually..
Reply to this comment
by sticks1839 September 5, 2008 11:53 AM PDT
I like the idea of including videogames in the test material (and you're already using a PS3), just to get an idea if there even is a difference in how they are handled (plus you can truly say those "Game" modes are crap).

As far as the motion resolution goes, I'm all for more information, but just be careful how you explain it. I don't think it should be a part of the Geek box, since it's very subjective and could be misleading to people. A mention of it in the performance section along the lines of what the score is and whether or not you could notice any difference in program material (including videogames and sports).

Looking at the test you did of the above TVs, did you find it striking that the Panasonic Plasma performed so poorly when it is typically considered such a great television, especially in comparison to the Vizio? Also, does this motion-resolution test show why the Pioneer is worth the extra dough? Curious results to me.
Reply to this comment
by bob.mcclenahan September 5, 2008 3:17 PM PDT
I'd say use the measurement. The readings were all pretty close, and the numbers can be used to compare sets.

I am surprised the Panny scored so much worse than the Pioneer. Aren't they using the same glass? If so, it's obvious Pioneer's software is better.
Reply to this comment
by bunkey91405 September 9, 2008 4:50 PM PDT
I am deeply divided on this issue of testing methods and detailed results. When the reviews and testing goes on for some pages and you look at the details and find very small differences and items, acknowledged as, of little importance to the equipment or technology reviewed and you find conclusions, where the unit with less impressive specs is picked on a subjective over all liking by the reviewer(s), why include more tests? But, if the inclusion is a factor in its use and performance and can lead to finding why more owners like or are impressed by a unit or the reviewer(s) can say, this factor makes it our choice.
Reply to this comment
by FiguredMaple September 10, 2008 6:45 PM PDT
CNET absolutely should test for motion resolution, and any other tests that will help the consumer to make the best choice when buying an HDTV.
Reviews that include details like this will not only reveal deficiencies, but will educate consumers, and help influence the manufacturers to make better quality products for us.
Thanks for doing this!
Reply to this comment
by dlp755 September 10, 2008 11:09 PM PDT
Of course CNET should test for motion resolution. It is AS IMPORTANT to a realistic viewing experience as _motion_ is to a motion picture.

And to term it "subjective" is just abdicating doing real testing.

You & Mr. Merson can surely figure out a way to standardize the counting of moving lines (high-speed photography was invented decades ago), and pull the eyeball out of it. We have had photo-sensors for decades.

The TV makers are practically tripping over each other to come up with solutions or attempts to fix the horrendous motion handling in most current sets. Good for them, and godspeed.

Look at any good CRT set from earlier this decade (Sony KV-40XBR800, KD-34XBR960, KD-36XS955 for example) and the motion blur are so miniscule as to imperceptible compared to the current TV crop.

SED, FED, and passive-matrix OLED have all seen development in good part to fix the abysmal motion resolution of current flat panel technologies. We are nowhere near where we were even a few years ago in terms of motion resolution with CRTs.

CRTs may be cost, weight, and size-prohibitive these days, but that does not mean that current technologies even come close to the CRT standard.

Not only should you test them with the tests available, you should seek to incorporate newer motion-handling resolution testing capabilities at every turn.

Pretty please. With sugar on top. Don't ignore the problems. Point them out, and praise those who measurably advance the OBJECTIVE detail displayed.
Reply to this comment
by katzmaier September 11, 2008 10:40 AM PDT
Thanks for the replies all.

It's a go, I'm adding the test to reviews, with an eye toward including it as an official Geek Box test as soon as I have enough data to arrive at "Good, Average, Poor" qualifiers. In the meantime it will appear as another standard point of discussion in the Performance>Video processing section. Check out the Samsung LN46A950 review for an example (http://reviews.cnet.com/flat-panel-tvs/samsung-ln-46a950/4505-6482_7-33182079.html).

To dlp755's points, I had a discussion with Merson recently and believe I can make the test as objective as possible. Apparently a high-speed camera is available that can make it truly objective, but it costs $100 grand, so that's not in the cards right now.

Thanks for the feedback,

Katz
Reply to this comment
by takemydog01 September 19, 2008 10:58 AM PDT
Hello David Katzmaier.
I think HDTV should be free!
If you would like to return an email to me, this is my address: takemydog01atyahoodotcom.
May God bless you!
Chris
Reply to this comment
by chuckdaly September 29, 2008 3:39 PM PDT
I say use the test. Motion blur is a subjective term, that can be understood as ghosting or a blurring of of sharp lines. Two distinct negative traits cobbled together under one term. Remember the whole Sharp Aquos "Banding" issue. The issue wasn't actually banding but poor light uniformity. Labeling the test as a motion resolution test, oposed to a motion blur test, and it will be very helpful to readers choosing an HDTV to purchase. Remember, the only static image on a 1080p Blu-ray disc is the FBI warning.
Reply to this comment
by chadmak09 October 5, 2008 1:04 PM PDT
I would love to see some standardized test for motion resolution.
BUT
If the results vary so much depending on the person doing the test (as the test mentioned above does), I think it has no place in a CNET review.
The only way I think it should be allowed is if say, 10 editors/reviewers at CNET do the test. Then maybe create an average motion resolution by adding all 10 motion resoultion results together, and then dividing by 10. This could be the "average observed motion resolution".

But even then, the result may still vary depending on what 10 people do the test.
So in a way, it will still somewhat unreliable.
Reply to this comment
advertisement
Click Here

About Crave

The name says it all. Crave is our blog about gorgeous gadgets and other crushworthy stuff. If you would like to contact Crave with a tip or comment, please write to: crave@cnet.com

Add this feed to your online news reader

Crave topics

In the news now

Apple's iPhone 2.2
hits the street

The latest software update offers several improvements to Google maps as well as wireless downloading for podcasts.



The big chill for holiday parties?

Tech companies faced with cost-cutting may not be canceling the annual festivities outright, but things are certainly being done differently this year.



advertisement

Inside CNET News

Scroll Left Scroll Right